heree to BACO Enterprises , Inc. Baco Enterprises Inc. herepanies in one. We are a distributor of fasteners, a threaded rod and anchor bolt manufacturer, a steel service center, and a miscellaneous steel fabricator. ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in … A325; A490; F3125; Heavy hex structural bolts are designed for steel-to-steel structural connections. Consequently, they are typically very short. The A325 and A490 specifications are not intended for general applications, including anchor bolts .

ASTM A325 is an ASTM International standard for heavy hex structural bolts , titled Standard Specification for Structural Bolts , Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength.It defines mechanical properties for bolts that range from 1 ⁄ 2 to 1 1 ⁄ 2 inches (13 to 38 mm) in diameter.. The equivalent metric standard is ASTM A325M, Grade A325 bolts are available in diameters from 1/2 to 1-1/2 inch (for diameters greater than 1-1/2, ASTM A449 specifications should be considered) with a minimum tensile strength of 120,000 PSI. Specification for Structural Joints Using ASTM A325 or A490 Bolts June 30, 2004 Supersedes the June 23, 2000Specification for Structural Joints Using ASTM A325 or A490 Bolts .

36 TECHNICAL DATA 36 HEAVY HEX STRUCTURAL BOLTS All test results and suggestions are based on laboratory tests. Specific job site conditions should be taken into consideration We can provide the best structural fasteners, on time and at herepetitive prices. Follow this link to request a structural fastener quote or give us a call at 1-800-466-9780. Specification for Structural Joints Using High-Strength Bolts December 31, 2009 Supersedes the June 30, 2004 Specification for Structural Joints Using ASTM A325 or A490 Bolts .

From inception Leland concentrated on domestic manufacture of Bolts , Nuts and Screws using only North American Steel and Labour herepeting herepetitors both at home and internationally.